NeckUp 4 inch Guitar Support, brown

NeckUp 4 inch Guitar Support, brown

Model: GSmini_Brown
$59.95
  • Low prices
  • Worldwide shipping
  • Knowledgeable staff
  • Satisfaction guarantee
  • Fully secure https

Description

  • Mount Type: Suction Cups
  • Lift in inches: 3" - 6.5"
  • Orientation: RH or LH
  • Fits In Case: No

For a complete comparison chart, visit our Best Guitar Support Guide.

The NeckUp Mini Guitar Support works just like its larger siblings, but also fits guitars as narrow as 1.5 inches. This makes it perfect for many solid body electric guitars and basses, travel guitars, children’s guitars, mandolins, ukuleles, and resonator banjos.

Here are some of this support’s key advantages:

  • It’s extremely comfortable
  • It allows freedom of movement in many directions
  • You can adjust the guitar neck from level to at least 45 degrees
  • It fits any size guitar
  • The 4-inch support arm lowers the center of gravity and increases stability on thinner, heavier guitars
  • It works for right or left leg position
  • The support easily folds up to fit in most guitar cases

Another great feature is a slotted hole at one end that attaches directly to a guitar’s endpin/jack if available. This creates a solid anchor from one end of the strap to the guitar. If you don’t have an endpin/jack, you can attach that end of the support with a suction cup. The other end attaches to the middle-lower bout area with a suction cup. Two large 2.5-inch suction cups and one mini 1.75-inch cup ship with the support.

You can adjust the guitar’s angle by changing the suction cup’s placement on the bout. In testing at Strings By Mail, we found that initial adjustments can be a bit time consuming. However, once you find what works, getting the support on and off the guitar is a breeze.

The NeckUp Mini Guitar Support provides between 3 inches and 6.5 inches of lift. Tilting the guitar toward you more than a modest 10 degrees may not be an option because it can cause the suction cups to come loose.

This brown guitar support is also available in black. A 5-inch version provides 3.5 inches to 6.5 inches of lift, and a 6-inch version offers 3.5 inches to 7.5 inches of lift.

Always remove guitar supports and other detachable accessories from your guitar after each use. In addition, make sure your guitar’s finish has cured at least six months before attaching any accessory.

Certain guitar finishes, like French Polishes, require suction cup protectors like the Kling-On SP-2P-C, which aids in suction cup strength.This product uses a light, non-permanent adhesion.

Features

  • Model: GSmini_Brown
  • Manufactured by: Neck Up
  • Condition: New

You May Also Like

  1. Home
  2. Guitar Accessories
  3. Guitar Supports
  4. Guitar Supports
  5. NeckUp 4 inch Guitar Support, brown