A-Frame-MI Multi-Instrument Adjustable Support

A-Frame-MI Multi-Instrument Adjustable Support

Model: A-Frame-MI - 796279113472 UPC: 796279113472
$54.95
  • Low prices
  • Worldwide shipping
  • Knowledgeable staff
  • Satisfaction guarantee
  • Fully secure https

Description

  • Mount Type: Suction Cups
  • Lift in inches: 2.25" - 7.25"
  • Orientation: RH or LH
  • Fits In Case: No

For a complete comparison chart, visit our Best Guitar Support Guide.

The A-Frame-MI Multi-Instrument Adjustable Support is one of the only supports that fits on virtually any guitar – classical, acoustic, electric, or bass. It also fits on ukuleles, banjos, and mandolins. It fits so many instruments because the suction cups attach to the back of the instrument, not the side.

“Adjustable” isn’t just a word in the product’s title – it’s this support's hallmark. You can separately adjust three different aspects of positioning: left to right, angle, and height. Once you find the perfect position, it’s simple to lock everything into place.

Our testing at Strings By Mail found that the multiple adjustments available make the A-Frame-MI Multi-Instrument Adjustable Support very comfortable, and ensure that it moves with you as you play. It has a bit more left-to-right flexibility than the standard model.

Depending on where you attach the support's suction cup to your instrument, virtually any angle is possible - from the neck being almost parallel to the ground to the head stock pointing up at a relatively steep angle.

You can change the amount of leg lift by adjusting the strap on the bottom of the support, which rests on your leg. You can achieve leg lift of about 2.25 inches to 7.25 inches, a full inch higher than the standard model. The strap also allows a full range of rake adjustment.

All of the possible adjustments make this support a great substitute for a foot stool. It folds flat to a size of about 8.5 inches by 2 inches by 3 7/8 inches for storage in your case, making it just a bit thicker than the standard model.

Please note that the finish on a small number of instruments may react with the suction cups on this product, leaving a permanent mark. The vast majority of finishes have no problems with the suction cups. During the first few weeks of use, inspect the finish regularly.

As with any accessory that attaches to your instrument, you should make sure that your instrument’s finish has cured at least six months before using this guitar support. We also recommend that you remove supports and other detachable accessories from your instrument after each use.

Certain guitar finishes, like French Polishes, require suction cup protectors like the Kling-On SP-2P-C, which aids in suction cup strength.This product uses a light, non-permanent adhesion.

Features

  • Model: A-Frame-MI - 796279113472
  • Manufactured by: A-Frame
  • Condition: New
  • UPC: 796279113472

You May Also Like

  1. Home
  2. Guitar Accessories
  3. Guitar Supports
  4. Guitar Supports
  5. A-Frame-MI Multi-Instrument Adjustable Support